fli4l

Re(5): fli4l

creed05 — Sun, 08 Dec 2002 21:13:18 GMT

hab ich mir auch gedacht....
aber es hat vorher mit win 2000 prof. und ics.
wenn längere zeit nur ein computer auf den router zugrifft. kann ich auch mit 50-55 KB/s downloadn. surft man aber mit 2 computer und surft man dann nur mehr mit einem bekommt man troztdem nur ca. 20 KB/s.

DANKE für die antwort...

mfg

Re(3): fli4l

creed05 — Sun, 08 Dec 2002 21:01:29 GMT

nein.

insgesamt.

mfg

Re(2): fli4l

MG — Sun, 08 Dec 2002 19:35:45 GMT

Jeder der Computer hat 10-20 kbit/s? Dann wäre ja eh alles in bester Ordnung.

Re(4): fli4l

mIstA — Sun, 08 Dec 2002 19:31:50 GMT

habe ihn auf 200 MHZ getaktet. das selbe problem..

Das zu versuchen, wollt ich schon vorschlagen.

An sich müßt der Rechner auch @75 MHz locker schnell genug sein für a ADSL-Leitung.    (Hab selbst lang genug einen Pentuim 75 mit nur 16 MB dafür verwendet; und sogar samba & squid laufen gehabt.)

Nachdem bei dir auch hochdreahen auf 200 MHz nichts hilft, liegts wohl an der 'Zuleitung'.

Re: fli4l

Tom2k — Sun, 08 Dec 2002 14:30:59 GMT

hast du ev. mal coyotelinux probiert: http://www.coyotelinux.com/

vielleicht klappts damit!

lg
tom2k

Re(2): fli4l

Tom2k — Sun, 08 Dec 2002 13:47:17 GMT

hast du es mal mit def fli4l-support versucht:
http://www.fli4l.de/german/support.php

Ich denke, dort sitzen die waren Experten. Die können Dir sagen, ob Deine Hardware zu langsam für die Anforderungen ist!

lg
tom2k

Re(3): fli4l

creed05 — Sun, 08 Dec 2002 13:45:46 GMT

habe ihn auf 200 MHZ getaktet. das selbe problem...

DANKE, für die antwort

mfg

Re(2): fli4l

mischamann — Sun, 08 Dec 2002 13:21:53 GMT

ich würd' ihn lieber mal auf 100MHz takten

Re: fli4l

creed05 — Sun, 08 Dec 2002 13:17:47 GMT

hallo!
es ist schon wieder sehr langsam.
aber nur wenn man mit 2 computern gleichzeitung surft.
die leitung schafft dann ca. 10-20 KB/s. statt 55KB/s.
kann es sein, dass ich mehr ram brauche???

mfg

Re: fli4l

creed05 — Sun, 08 Dec 2002 07:59:46 GMT

morgen

heute funktioniert es wieder. ohne neustart oder änderung der einstellungen....
kann es sein, dass es an der TA gelegen hat????

mfg

Re(5): fli4l

creed05 — Sat, 07 Dec 2002 20:13:45 GMT

meine dsl config:

##-----------------------------------------------------------------------------
## dsl.txt - fli4l configuration parameters                        2.0.6
##
##        P L E A S E   R E A D   T H E   D O C U M E N T A T I O N ,
##                      S E E   R E A D M E . T X T
##
##        B I T T E  U N B E D I N G T   D I E   D O K U M E N T A T I O N
##              L E S E N ,  S I E H E   R E A D M E . T X T
##
## Creation:     26.06.2001  fm
## Last Update:  $Id: dsl.txt,v 1.5 2002/02/04 01:04:27 fm Exp $
##
## Copyright (c) 2001-2002 Frank Meyer
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##-----------------------------------------------------------------------------
#------------------------------------------------------------------------------
# Optional package: PPPoE
#------------------------------------------------------------------------------
OPT_PPPOE='no'                         #use ppp over ethernet: yes or no
PPPOE_NAME='DSL'                        #circuit name, dont write spaces
PPPOE_USEPEERDNS='no'                   #use dns server of your provider: yes or no
PPPOE_ETH='eth1'                        #eth card connected to ADSL modem, e.g. 2nd
PPPOE_USER='anonymer'                   #username
PPPOE_PASS='surfer'                     #password
PPPOE_DEBUG='no'                        #enable pppd debugging, yes or no
PPPOE_HUP_TIMEOUT='600'                 #idle time after which to hangup
PPPOE_CHARGEINT='60'                    #value of charge interval (in seconds)
PPPOE_TIMES='Mo-Su:00-24:0.0:Y'         #times/charges when LCR
#------------------------------------------------------------------------------
# Optional package: PPTP - DSL in Austria/Netherlands
#------------------------------------------------------------------------------
OPT_PPTP='yes'                           #use PPP over ethernet: yes or no
PPTP_NAME='DSL'                         #circuit name, dont write spaces
PPTP_USEPEERDNS='yes'                   #use dns server of your provider: yes or no
PPTP_ETH='eth1'                         #ethernet card connected to ADSL modem
PPTP_USER='user'                  #username
PPTP_PASS='pass'                    #password
PPTP_DEBUG='no'                         #enable pppd debugging, yes or no
PPTP_HUP_TIMEOUT='10080'                #idle time after which to hangup
PPTP_MODEM_TYPE='bcaa'                  #2 different types in Austria: bbaa / bcaa
# in the Netherlands use 'mxstream'
PPTP_CHARGEINT='60'                     #value of charge interval (in seconds)
PPTP_TIMES='Mo-Su:00-24:0.0:Y'          #times/charges when LCR
#----------------------------------------------------------------------------
# optional package: PPPoE-Status
#----------------------------------------------------------------------------
OPT_POESTATUS='no'                      #show pppoe status on console #3

Re(4): fli4l

creed05 — Sat, 07 Dec 2002 20:12:30 GMT

4/4

HOSTS_N='9'                             #number of hosts in your domain
HOST_1='192.168.0.1 fli4l'              #1st host: ip and name
HOST_2='192.168.0.2 cafeamd400web'      #2nd host: ip and name
HOST_3='192.168.0.3 cafeamd400'         #3rd host: ip and name
HOST_4='192.168.0.4 bueroamd950'        #4th host: ip and name
HOST_5='192.168.0.5 hausp200'
HOST_6='192.168.0.6 hausp1400'
HOST_7='192.168.0.7'                    #4th host: ip and name
HOST_8='192.168.0.8'                    #4th host: ip and name
HOST_9='192.168.0.9'                    #4th host: ip and name
#------------------------------------------------------------------------------
# Special DNS configuration
#------------------------------------------------------------------------------
DNS_N='0'                               #number of special dns servers, normally 0
#DNS_1='firma.de 192.168.1.12'      # 1st special dns server for firma.de
#DNS_2='lan.firma.de 192.168.2.12'  # 2nd special dns server for lan.firma.de
#------------------------------------------------------------------------------
# imond configuration:
#------------------------------------------------------------------------------
START_IMOND='yes'                       #start imond: yes or no
IMOND_PORT='5000'                       #TCP-Port, see also FIREWALL_DENY_PORT_x!
IMOND_PASS='enter'                      #imond-password, may be empty
IMOND_ADMIN_PASS=''                     #imond-admin-password, may be empty
IMOND_LED=''                            #tty for led: com1 - com4 or empty
IMOND_BEEP='no'                         #beep if connection going up/down
IMOND_LOG='no'                          #log /var/log/imond.log: yes or no
IMOND_LOGDIR='/var/log'                 #log-directory, e.g. /var/log
IMOND_ENABLE='yes'                      #accept "enable/disable" commands
IMOND_DIAL='yes'                        #accept "dial/hangup" commands
IMOND_ROUTE='yes'                       #accept "route" command
IMOND_REBOOT='yes'                      #accept "reboot" command
#------------------------------------------------------------------------------
# Generic circuit configuration:
#------------------------------------------------------------------------------
IP_DYN_ADDR='yes'                       #use dyn. ip addresses (most providers do)
DIALMODE='auto'                         #standard dialmode: auto, manual, or off
#------------------------------------------------------------------------------
# optional package: syslogd
#------------------------------------------------------------------------------
OPT_SYSLOGD='no'                        #start syslogd: yes or no
SYSLOGD_DEST_N='1'                      #number of destinations
SYSLOGD_DEST_1='*.* /dev/console'       #nth prio & destination of syslog msgs
SYSLOGD_DEST_2='*.* @192.168.6.2'       #example: loghost 192.168.6.2
SYSLOGD_DEST_3='kern.info /var/log/dial.log'# example: log infos
#------------------------------------------------------------------------------
# optional package: klogd
#------------------------------------------------------------------------------
OPT_KLOGD='no'                          #start klogd: yes or no
#------------------------------------------------------------------------------
# optional package: y2k correction
#------------------------------------------------------------------------------
OPT_Y2K='no'                            #y2k correction: yes or no
Y2K_DAYS=''                             #correct hardware Y2K-Bug: add x days
#------------------------------------------------------------------------------
# Optional package: PNP
#------------------------------------------------------------------------------
OPT_PNP='no'                            #install isapnp tools: yes or no
ETH_DRV_2='via-rhine'
ETH_DRV_2_OPTION=''

Re(3): fli4l

creed05 — Sat, 07 Dec 2002 20:11:49 GMT

3/4

#------------------------------------------------------------------------------
# Ether networks used with IP protocol:
#------------------------------------------------------------------------------
IP_ETH_N='1'                            #number of ip ethernet networks, usually 1
IP_ETH_1_NAME=''                        #optional: other device name than ethX
IP_ETH_1_IPADDR='192.168.0.1'           #IP address of your nth ethernet card
IP_ETH_1_NETWORK='192.168.0.0'          #network of your LAN
IP_ETH_1_NETMASK='255.255.255.0'        #netmask of your LAN
#------------------------------------------------------------------------------
# Additional routes, optional
#------------------------------------------------------------------------------
IP_DEFAULT_GATEWAY=''                   #normally not used, read documentation!
IP_ROUTE_N='0'                          #number of additional routes
IP_ROUTE_1='192.168.7.0 255.255.255.0 192.168.6.99'# network netmask gateway
#------------------------------------------------------------------------------
# Masquerading:
#------------------------------------------------------------------------------
MASQ_NETWORK='192.168.0.0/24'           #networks to masquerade (e.g. our LAN)
MASQ_MODULE_N='1'                       #load n masq modules (default: only ftp)
MASQ_MODULE_1='ftp'                     #ftp
MASQ_MODULE_2='h323'                    #h323 (netmeeting)
MASQ_MODULE_3='icq'                     #icq (use with caution!)
MASQ_MODULE_4='irc'                     #irc
MASQ_MODULE_5='raudio'                  #raudio
MASQ_MODULE_6='vdolive'                 #vdolive
MASQ_MODULE_7='quake'                   #quake
MASQ_MODULE_8='cuseeme'                 #cuseeme
MASQ_MODULE_9='mms'                     #MSN-Filetransfer
MASQ_MODULE_10='pptp'                   #pptp
MASQ_MODULE_11='ipsec'                  #ipsec
MASQ_MODULE_12='dplay'                  #dplay (direct play)
MASQ_MODULE_13='msn-0.02'               #msn zone (use version 0.01 or 0.02)
MASQ_MODULE_14='udp_dloose'             #pseudo mod: some internet games need it
MASQ_FTP_PORT_N='0'                     #using ftp masq-module on different ports
MASQ_FTP_PORT_1='21'                    #standard ftp port
MASQ_FTP_PORT_2='2021'                  #additional port
#------------------------------------------------------------------------------
# Optional package: PORTFW
#
# If you set OPT_PORTFW='yes', you can also edit opt/etc/portfw.sh
#------------------------------------------------------------------------------
OPT_PORTFW='no'                         #install port forwarding tools/modules
PORTFW_N='0'                            #how many portforwardings to set up
PORTFW_1='8080 192.168.6.15:80 tcp'     #sample 1: forward ext. port 8080 to int.
# host 192.168.6.15 to port 80 (use tcp)
PORTFW_2='3000-3010 192.168.6.15 tcp'   #sample 2: forward portrange to int. host
# 192.168.5.15 (use tcp)
#------------------------------------------------------------------------------
# Routing without masquerading
#------------------------------------------------------------------------------
ROUTE_NETWORK=''                        #optional: route from/to network, no masq
#------------------------------------------------------------------------------
# Routing: internal hosts to deny forwarding
#------------------------------------------------------------------------------
FORWARD_DENY_HOST_N='0'                 #number of denied hosts
FORWARD_DENY_HOST_1='192.168.6.5'       #optional: 1st denied host
FORWARD_DENY_HOST_2='192.168.6.6'       #optional: 2nd denied host
#------------------------------------------------------------------------------
# Routing: ports to reject/deny forwarding (from inside and outside!)
#------------------------------------------------------------------------------
FORWARD_DENY_PORT_N='1'                 #no. of ports to reject/deny forwarding
FORWARD_DENY_PORT_1='137:139 REJECT'    #deny/reject forwarding of netbios
FORWARD_TRUSTED_NETS=''                 #but allow forwarding between LANs
#------------------------------------------------------------------------------
# Firewall: ports to reject/deny from outside (all served ports)
#
# here we leave two ports untouched:
#
#  53 dns
# 113 auth
#------------------------------------------------------------------------------
FIREWALL_DENY_PORT_N='6'                #no. of ports to reject/deny
FIREWALL_DENY_PORT_1='0:52 REJECT'      #privileged ports: reject or deny
FIREWALL_DENY_PORT_2='54:112 REJECT'    #privileged ports: reject or deny
FIREWALL_DENY_PORT_3='114:1023 REJECT'  #privileged ports: reject or deny
FIREWALL_DENY_PORT_4='5000:5001 REJECT' #imond/telmond ports: reject or deny
FIREWALL_DENY_PORT_5='8000 REJECT'      #proxy access: reject or deny
FIREWALL_DENY_PORT_6='20012 REJECT'     #vbox server access: reject or deny
FIREWALL_DENY_ICMP='no'                 #deny icmp (ping): yes or no
FIREWALL_LOG='yes'                      #log access to rejected/denied ports
#------------------------------------------------------------------------------
# Domain configuration:
#------------------------------------------------------------------------------
START_DNS='yes'                         #start dns server: yes or no
DNS_FORWARDERS='195.3.96.67 195.3.96.68'#DNS servers of your provider, e.g. MSN
DNS_VERBOSE='no'                        #log queries in /usr/local/ens/ens.log
DOMAIN_NAME='zank'                      #your domain name
DNS_FORBIDDEN_N='0'                     #number of forbidden domains
DNS_FORBIDDEN_1='foo.bar'               #1st forbidden domain
DNS_FORBIDDEN_2='bar.foo'               #2nd forbidden domain

Re(2): fli4l

creed05 — Sat, 07 Dec 2002 20:09:03 GMT

2/3

#------------------------------------------------------------------------------
# Ethernet card drivers:
# uncomment your ethernet card
#------------------------------------------------------------------------------
ETH_DRV_N='2'                           #number of ethernet drivers to load, usually 1
#ETH_DRV_1='3c505'              # ISA: 3COM Etherlink Plus (3c505)
#ETH_DRV_1='3c507'              # ISA: 3COM Etherlink 16 (3c507)
#ETH_DRV_1='3c509'              # ISA: 3COM EtherLinkIII (3c509)
#ETH_DRV_1='3c515'              # ISA: 3COM EtherLink XL ISA (3c515)
#ETH_DRV_1='3c59x'              # PCI: 3COM Vortex/Boomerang 3c59x,3c900,3c905
#ETH_DRV_1='82596'              # Apricot Xen-II on board Ethernet
#ETH_DRV_1='3c503'              # ISA: 3COM EtherLinkII (3c503)
#ETH_DRV_1='e2100'              # ISA: Cabletron E21xx ISA
#ETH_DRV_1='hp'                 # ISA: HP PCLAN (27245, 27xxx) ISA
#ETH_DRV_1='hp-plus'            # ISA: HP PCLAN+ (27247B and 27252A) ISA
ETH_DRV_1='tulip'                       #ISA: NE2000 ISA clone (eg. Realtek 8019,
# Accton 16xx, NatSemi 8390, UMC 9003/9008)
#ETH_DRV_1='ne2k-pci'           # PCI: NE2000 PCI clone (eg. Realtek 8029,
# Winbond 89c940)
#ETH_DRV_1='smc-ultra'          # ISA: SMC ULTRA
#ETH_DRV_1='smc-ultra32'        # EISA: SMC ULTRA32 (NEW)
#ETH_DRV_1='wd'                 # ISA: SMC WD80*3
#ETH_DRV_1='at1700'             # ISA: AT1700 (Fujitsu 86965) ISA
#ETH_DRV_1='cs89x0'             # ISA: IBM Etherjet, cs89x0 based Cards (Option io=0xnnn necessary!)
#ETH_DRV_1='de4x5'              # PCI/EISA: Digital DE425, DE434, DE435, DE450, DE500
#ETH_DRV_1='depca'              # ISA: DEPCA, DE10x, DE200, DE201, DE202, DE422
#ETH_DRV_1='dgrs'               # PCI: Digi International RightSwitch PCI/EISA
#ETH_DRV_1='dmfe'               # PCI: DM9102 compatible PCI cards from Davicom
#ETH_DRV_1='elp486'             # ISA: Intel Professional Workstation/panther 82596
#ETH_DRV_1='eepro'              # ISA: Intel EtherExpress Pro/10
#ETH_DRV_1='eepro100'           # PCI: Intel EtherExpressPro PCI 10+/100B/100+
#ETH_DRV_1='eexpress'           # ISA: EtherExpress16 ISA
#ETH_DRV_1='epic100'            # PCI: SMC EPIC/100 (EtherPower II) PCI
#ETH_DRV_1='eth16i'             # ISA/EISA: ICL EtherTeam 16i/32
#ETH_DRV_1='ewrk3'              # ISA: EtherWORKS 3 ISA (DE203, DE204, DE205)
#ETH_DRV_1='fealnx'             # PCI: ASOUND LAN 8139 card - not RTL8139 (NEW)
#ETH_DRV_1='hp100'              # ISA/EISA/PCI: HP 10/100VG PCLAN (ISA, EISA, PCI)
#ETH_DRV_1='lance'              # ISA: AMD LANCE and PCnet (AT1500, NE2100) ISA
#ETH_DRV_1='old_tulip'          # PCI: Old DECchip Tulip (dc21x4x) PCI
#ETH_DRV_1='pcnet32'            # PCI: AMD PCI PCnet32
#ETH_DRV_1='rtl8139-orig'       # PCI: RealTek 8129/8139 (not 8019/8029!)
#ETH_DRV_1='rtl8139'            # PCI: RealTek 8129/8139 (not 8019/8029!) (NEW)
#ETH_DRV_1='8139too'            # PCI: RealTek 8139 10/100 MB (NEW)
#ETH_DRV_1='sis900'             # PCI: SiS 900/7016
#ETH_DRV_1='sundance'           # PCI: DFE-550FX or DFE-530TXS (NEW)
#ETH_DRV_1='tlan'               # PCI: TI ThunderLAN (Compaq Netelligent ...)
#ETH_DRV_1='tulip'              # PCI: DECchip Tulip (dc21x4x) PCI
#ETH_DRV_1='natsemi'            # PCI: Nat Semi
#ETH_DRV_1='starfire'           # PCI: Starfire
#ETH_DRV_1='via-rhine'          # PCI: VIA Rhine PCI (3043, VT86c100A, dfe-530tx)
#ETH_DRV_1='winbond-840'        # PCI: Winbond 840
#ETH_DRV_1='lanstreamer'        # Token Ring: IBM Auto LANStreamer PCI Adapter
#ETH_DRV_1='olympic'            # Token Ring: IBM cards (Pit/Pit-Phy/Olympic)
#ETH_DRV_1='ibmtr'              # Token Ring: IBM 16/4
#ETH_DRV_1='pcnet_cs'           # PCMCIA: NS8390-based cards (NE2000, DLINK etc)
#ETH_DRV_1='3c574_cs'           # PCMCIA: 3Com 574
#ETH_DRV_1='3c575_cb'           # PCMCIA: 3Com 575
#ETH_DRV_1='3c589_cs'           # PCMCIA: 3Com 589
#ETH_DRV_1='airo'               # PCMCIA: Airo 4500 & 4800 series cards
#ETH_DRV_1='airo_cs'            # PCMCIA: Airo 4500 & 4800 series cards
#ETH_DRV_1='eepro100_cb'        # PCMCIA: EtherExpress Pro 100
#ETH_DRV_1='epic_cb'            # PCMCIA: SMC 83c170 EPIC/100
#ETH_DRV_1='ibmtr_cs'           # PCMCIA: IBM Token Ring
#ETH_DRV_1='netwave_cs'         # PCMCIA: Netwave AirSurfer Wireless LAN
#ETH_DRV_1='nmclan_cs'          # PCMCIA: New Media Ethernet LAN
#ETH_DRV_1='ray_cs'             # PCMCIA: Raylink wireless cards
#ETH_DRV_1='smc91c92_cs'        # PCMCIA: SMC91c92-based cards
#ETH_DRV_1='tulip_cb'           # PCMCIA: DEC 21040-family cards
#ETH_DRV_1='wavelan_cs'         # PCMCIA: WaveLAN
#ETH_DRV_1='wavelan2_cs'        # PCMCIA: WaveLAN2
#ETH_DRV_1='wvlan_cs'           # PCMCIA: Lucent WaveLAN/IEEE 802.11
#ETH_DRV_1='xirc2ps_cs'         # PCMCIA: Xircom: CE2, CEM28, CEM33, or CE3
#ETH_DRV_1='wl24_cs'            # PCMCIA: ELSA Airlancer MC-2
#ETH_DRV_1='cs89x0_cs'          # PCMCIA: IBM EtherJet Ethernet Adapter
#ETH_DRV_1='orinoco_cs' # PCMCIA: Orinoco Based WLAN Cards (NEW)
#ETH_DRV_1='axnet_cs' # PCMCIA: Asix AX88190 Fast Ethernet (NEW)
#ETH_DRV_1='realtek_cb' # PCMCIA: Realtek 8139 Based PCMCIA Cards (D-Link DFE-690TXD) (NEW)
#ETH_DRV_1='xircce_cs' # PCMCIA: Xircom CreditCard Ethernet CE-10 (NEW)
ETH_DRV_1_OPTION=''

Re: fli4l

creed05 — Sat, 07 Dec 2002 20:08:11 GMT

weiss keiner eine antwort?

meine base config:
1/3

##-----------------------------------------------------------------------------
## base.txt - fli4l configuration parameters                       2.0.6
##
##
##        P L E A S E   R E A D   T H E   D O C U M E N T A T I O N ,
##                      S E E   R E A D M E . T X T
##
##        B I T T E  U N B E D I N G T   D I E   D O K U M E N T A T I O N
##              L E S E N ,  S I E H E   R E A D M E . T X T
##
## Creation:     26.06.2001  fm
## Last Update:  $Id: base.txt,v 1.20.2.6 2002/09/30 05:19:19 rresch Exp $
##
## Copyright (c) 2001-2002 Frank Meyer
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##-----------------------------------------------------------------------------
#------------------------------------------------------------------------------
# General settings:
#------------------------------------------------------------------------------
HOSTNAME='fli4l'                        #name of fli4l router
PASSWORD='mein passwort'                     #password for telnetd, ftpd and sshd
MOUNT_BOOT='rw'                         #mount boot device (floppy): ro, rw, no
RAMSIZE='2048'                          #size of ramdisk for unzipped opt.tgz
# the variables MOUNT_OPT, PART_OPT and UPDATE_MODE will be ignored if
# RAMSIZE is not empty. see docu
MOUNT_OPT='ro'                          #mount opt device: ro, rw
PART_OPT='hda2'                         #location of opt-files? ram1 or disk-partition
UPDATE_MODE='full'                      #add, cfg, full, none, see documentation

Re(4): fli4l

Tom2k — Sat, 07 Dec 2002 16:46:05 GMT

da gibts auch einen Windows-Oberfläche, Du wählst Deine 2 Netzwerkkartentreiber aus, machst ein paar konfigurationen und wählst auch noch zusätzliche features, die Du willst aus...

Dann erstellt er eine Diskette, die Du dann in einen PC, der lediglich aus Mainboard + 2 Netzwerkkarten + Floppy besteht reinschiebst und schon läuft die Sache.
Du kannst Dir sogar noch ein Display (zB vom Conrad) hinbasteln, welches Dir die wichtigsten daten online ausgibt...

fli4l ist da allerdings nicht die einzige Variante es gibt zB auch noch coyote Linux...

Da ich zu Hause aber auch noch zum PHP/MySQL testen einen WebServer habe, hab ich gleich Suse auf meinem 133er installiert...

lg
tom2k

Re(4): fli4l

creed05 — Sat, 07 Dec 2002 16:41:52 GMT

ja.

man kann es auch unter windows konfigurieren.....

mfg

Re(3): fli4l

thewiener — Sat, 07 Dec 2002 16:37:21 GMT

Wenn ich das richtig verstanden hab, konfiguriert man unter Linux eine Boot disk, haut sie in einen anderen Rechner rein, boot from Floppy und der Router läuft?

(theorethisch natürlich)

Re(2): fli4l

Tom2k — Sat, 07 Dec 2002 16:20:04 GMT

Das ist ein sog. "one-disk-router" -> Infos: http://www.fli4l.org/

ist im Prinzip eine super Sache, nur bei mir hats damals nicht so genau hingehauen...

lg
tom2k

Re(2): fli4l

creed05 — Sat, 07 Dec 2002 16:18:03 GMT

http://www.fli4l.de

mfg

Re: fli4l

thewiener — Sat, 07 Dec 2002 16:14:13 GMT

Auf die Gefahr hin, als DAU bezeichnet zu werden
was ist bitte fli4l?

fli4l

creed05 — Sat, 07 Dec 2002 15:32:04 GMT

hallo!

ich habe einen alten pc (16 MB SDRAM , Pentium 200 @ 75 MHZ) mit fli4l laufen. bekomme aber bei den downloads im durchschnitt nur 20KB/s. vorher hatte ich mit win2000 prof. und ics (pentium 200 MHZ, 64 MB EDO-RAM) immer ca. 50-55 KB/s.
natürlich ist es von den servern, wo ich downloade, abhängig. ich habe aber schon mehrer probiert...
wenn ich videos im Internet anschaue, kann ich schon ca. 40 bis 50 KB/s "downloadn".
weiß wer eine lösung?

ich habe adsl von der ta...

mfg