Erfahrungen mit MB Status Anzeige bei EPOX

Re(4): Erfahrungen mit MB Status Anzeige bei EPOX

SchusterHarry — Mon, 20 Oct 2003 22:03:51 GMT

100 Punkte-CPU

Re(3): Erfahrungen mit MB Status Anzeige bei EPOX

psycho_on_tour — Mon, 20 Oct 2003 21:14:44 GMT

wenn die dinger nur ff anzeigen, ohne vorher irgendwas anderes, dann ist für gewöhnlich cpu oder mainboard im eimer.

Re(3): Erfahrungen mit MB Status Anzeige bei EPOX

Somnatic — Mon, 20 Oct 2003 19:11:26 GMT

ja .. dann dürfte es wohl so sein, dass er keine HDD oder sonstiges Bootmedium findet ..

Re(2): Erfahrungen mit MB Status Anzeige bei EPOX

SchusterHarry — Mon, 20 Oct 2003 19:02:49 GMT

naja er ist aber mit FF stehengeblieben (ohne weiter Funktionen ) nur FF

Re(2): Erfahrungen mit MB Status Anzeige bei EPOX

SchusterHarry — Mon, 20 Oct 2003 19:02:07 GMT

ff war die anzeige und es war tatsächlich die CPU hin-hab die aus meinem Reserverrechner probehalber reingesteckt - trotzdem danke

Re(3): Erfahrungen mit MB Status Anzeige bei EPOX

Glockman — Mon, 20 Oct 2003 16:55:57 GMT

Habs ja auch nicht angezweifelt, sondern bestätigt

Re: Erfahrungen mit MB Status Anzeige bei EPOX

Glockman — Mon, 20 Oct 2003 16:54:27 GMT

68h Reserved
69h Turn on L2 cache
6Ah Reserved
6Bh Program chipset registers according to items described in
Setup & Auto-configuration table.
6Ch Reserved
6Dh 1. Assign resources to all ISA PnP devices.
2. Auto assign ports to onboard COM ports if the
corresponding item in Setup is set to AUTO.
6Eh Reserved
6Fh 1. Initialize floppy controller
2. Set up floppy related fields in 40:hardware.
70-72h Reserved
73h (Optional Feature) Enter AWDFLASH.EXE if :
-AWDFLASH is found in floppy drive.
-ALT+F2 is pressed
74h Reserved
75h Detect & install all IDE devices: HDD, LS120, ZIP, CDROM..
76h Reserved
77h Detect serial ports & parallel ports.
78h Reserved
79h Reserved
7Ah Detect & install co-processor
7B-7Eh Reserved
7Fh 1. Switch back to text mode if full screen logo is supported.
-If errors occur, report errors & wait for keys
-If no errors occur or F1 key is pressed to continue:
Clear EPA or customization logo.
80h Reserved
81h Reserved
82h 1. Call chipset power management hook.
2. Recover the text fond used by EPA logo (not for fullscreen logo)
3. If password is set, ask for password.
83h Save all data in stack back to CMOS
84h Initialize ISA PnP boot devices
85h 1. USB final Initialization
2. NET PC: Build SYSID structure
3. Switch screen back to text mode
4. Set up ACPI table at top of memory.
5. Invoke ISA adapter ROMs
6. Assign IRQs to PCI devices
7. Initialize APM
8. Clear noise of IRQs.
86-92h Reserved
93h Read HDD boot sector information for Trend Anti-Virus code
94h 1. Enable L2 cache
2. Program boot up speed
3. Chipset final initialization.
4. Power management final initialization
5. Clear screen & display summary table
6. Program K6 write allocation
7. Program P6 class write combining
95h 1. Program daylight saving
2. Update keyboard LED & typematic rate
96h 1. Build MP table
2. Build & update ESCD
3. Set CMOS century to 20h or 19h
4. Load CMOS time into DOS timer tick
5. Build MSIRQ routing table.
FFh Boot attempt (INT 19h)

Sorry, wurde etwas länger

Was genau ist das Problem? Was tut der Rechner (nicht)?

Re: Erfahrungen mit MB Status Anzeige bei EPOX

Glockman — Mon, 20 Oct 2003 16:54:02 GMT

23h 1. Check validity of RTC value:
e.g. a value of 5Ah is an invalid value for RTC minute.
2. Load CMOS settings into BIOS stack. If CMOS checksum
fails, use default value instead.
3. Prepare BIOS resource map for PCI & PnP use. If ESCD
is valid, take into consideration of the ESCDs legacy
information.
4. Onboard clock generator initialization. Disable respective
clock resource to empty PCI & DIMM slots.
5. Early PCI initialization:
-Enumerate PCI bus number
-Assign memory & I/O resource
-Search for a valid VGA device & VGA BIOS, and put it
into C000:0.
24-26h Reserved
27h Initialize INT 09 buffer
28h Reserved
29h 1. Program CPU internal MTRR (P6 & PII) for 0-640K
memory address.
2. Initialize the APIC for Pentium class CPU.
3. Program early chipset according to CMOS setup.
Example: onboard IDE controller.
4. Measure CPU speed.
5. Invoke video BIOS.
2A-2Ch Reserved
2Dh 1. Initialize multi-language
2. Put information on screen display, including Award title,
CPU type, CPU speed .
2E-32h Reserved
33h Reset keyboard except Winbond 977 series Super I/O chips.
34-3Bh Reserved
3Ch Test 8254
3Dh Reserved
3Eh Test 8259 interrupt mask bits for channel 1.
3Fh Reserved
40h Test 8259 interrupt mask bits for channel 2.
41h Reserved
42h Reserved
43h Test 8259 functionality.
44h Reserved
45-46h Reserved
47h Initialize EISA slot
48h Reserved
49h 1. Calculate total memory by testing the last double word of
each 64K page.
2. Program writes allocation for AMD K5 CPU.
4A-4Dh Reserved
4Eh 1. Program MTRR of M1 CPU
2. Initialize L2 cache for P6 class CPU & program CPU
with proper cacheable range.
3. Initialize the APIC for P6 class CPU.
4. On MP platform, adjust the cacheable range to smaller
one in case the cacheable ranges between each CPU are
not identical.
4Fh Reserved
50h Initialize USB
51h Reserved
52h Test all memory (clear all extended memory to 0)
53-54h Reserved
55h Display number of processors (multi-processor platform)
56h Reserved
57h 1. Display PnP logo
2. Early ISA PnP initialization
-Assign CSN to every ISA PnP device.
58h Reserved
59h Initialize the combined Trend Anti-Virus code.
5Ah Reserved
5Bh (Optional Feature) Show message for entering AWDFLASH.
EXE from FDD (optional)
5Ch Reserved
5Dh 1. Initialize Init_Onboard_Super_IO switch.
2. Initialize Init_Onbaord_AUDIO switch.
5E-5Fh Reserved
60h Okay to enter Setup utility; i.e. not until this POST stage can
users enter the CMOS setup utility.
61-64h Reserved
65h Initialize PS/2 Mouse
Appendix
66h Reserved
67h Prepare memory size information for function call:
INT 15h ax=E820h

Re(2): Erfahrungen mit MB Status Anzeige bei EPOX

Somnatic — Mon, 20 Oct 2003 16:53:51 GMT

sag ich doch

Re: Erfahrungen mit MB Status Anzeige bei EPOX

Glockman — Mon, 20 Oct 2003 16:53:13 GMT

Hi!

FF heisst, dass das BIOS die Kontrolle an das OS abgegeben hat. Also nachdem alle Checks (POST, Erweiterungskarten usw.) durch sind und keine Fehler aufgetreten sind.

Um aus dem Handbuch meines Epox zu zitieren:
C-1 POST CODES
POST (hex) DESCRIPTION
CFh Test CMOS R/W functionality.
C0h Early chipset initialization:
- Disable shadow RAM
- Disable L2 cache (socket 7 or below)
- Program basic chipset registers
C1h Detect memory
- Auto-detection of DRAM size, type and ECC.
- Auto-detection of L2 cache (socket 7 or below)
C3h Expand compressed BIOS code to DRAM
C5h Call chipset hook to copy BIOS back to E000 & F000 shadow
RAM.
0h1 Expand the Xgroup codes locating in physical address 1000:0
02h Reserved
03h Initial Superio_Early_Init switch.
04h Reserved
05h 1. Blank out screen
2. Clear CMOS error flag
06h Reserved
07h 1. Clear 8042 interface
2. Initialize 8042 self-test
08h 1. Test special keyboard controller for Winbond 977 series
Super I/O chips.
2. Enable keyboard interface.
09h Reserved
0Ah 1. Disable PS/2 mouse interface (optional).
2. Auto detect ports for keyboard & mouse followed by a
port & interface swap (optional).
3. Reset keyboard for Winbond 977 series Super I/O chips.
0B-0Dh Reserved
0Eh Test F000h segment shadow to see whether it is R/W-able or
not. If test fails, keep beeping the speaker.
0Fh Reserved
10h Auto detect flash type to load appropriate flash R/W codes
into the run time area in F000 for ESCD & DMI support.
11h Reserved
12h Use walking 1s algorithm to check out interface in CMOS
circuitry. Also set real-time clock power status, and then
check for override.
13h Reserved
14h Program chipset default values into chipset. Chipset default
values are MODBINable by OEM customers.
15h Reserved
16h Initial Early_Init_Onboard_Generator switch.
17h Reserved
18h Detect CPU information including brand, SMI type (Cyrix or
Intel) and CPU level (586 or 686).
19-1Ah Reserved
1Bh Initial interrupts vector table. If no special specified, all H/W
interrupts are directed to SPURIOUS_INT_HDLR & S/W
interrupts to SPURIOUS_soft_HDLR.
1Ch Reserved
1Dh Initial EARLY_PM_INIT switch.
1Eh Reserved
1Fh Load keyboard matrix (notebook platform)
20h Reserved
21h HPM initialization (notebook platform)
22h Reserved

Re: Erfahrungen mit MB Status Anzeige bei EPOX

Somnatic — Mon, 20 Oct 2003 15:31:47 GMT

du meinst bei den 2 Sieben Segment Anzeigen ?

FF heisst doch normalerweise dass alles OK ist und der bootvorgang begonnen hat - nicht ?
hab leider mein altes Epox nicht mehr da

Erfahrungen mit MB Status Anzeige bei EPOX

SchusterHarry — Mon, 20 Oct 2003 15:24:53 GMT

hab heir ein Epox MB das mir FF anzeigt
Könnte laut HP CPU sein-jemand mal schon sowas gehatb? will nicht unnötig ne neue CPU kaufen