Re: port trunk

HITCHER — Sun, 08 May 2005 12:15:10 GMT

http://www.kernel.org/pub/linux/kernel/people/marcelo/linux-2.4/Documentation/networking/bonding.txt

Auszug:
1) HA on a single switch or host - load balancing
-------------------------------------------------
It is the easiest to set up and to understand. Simply configure the
remote equipment (host or switch) to aggregate traffic over several
ports (Trunk, EtherChannel, etc.) and configure the bonding interfaces.
If the module has been loaded with the proper MII option, it will work
automatically. You can then try to remove and restore different links
and see in your logs what the driver detects. When testing, you may
encounter problems on some buggy switches that disable the trunk for a
long time if all ports in a trunk go down. This is not Linux, but really
the switch (reboot it to ensure).

Example 1 : host to host at double speed

          +----------+                          +----------+
          |               |eth0              eth0|              |
          | Host A    +-------------------+  Host B    |
          |              +-------------------+              |
          |               |eth1              eth1|              |
          +----------+                          +----------+

  On each host :
     # modprobe bonding miimon=100
     # ifconfig bond0 addr
     # ifenslave bond0 eth0 eth1

port trunk

krog — Sun, 08 May 2005 11:07:44 GMT

hi jungs

für windows 2k und XP gibts nic express findet man unter:
http://www.falconstor.com/nicexpress.asp