Impressum | Werbung

Geizhals » Forum » Hardware-Allgemein » SpinUp Probleme mit Festplatte (3 Beiträge, 242 Mal gelesen) Top-100 | Fresh-100

^ Forum  Hardware-Allgemein  #6712901 SpinUp Probleme mit Festplatte <-=LeFish=->(AUT) 02.02.2012, 10:27:25 Liebe Community! Habe neuerdings Probleme beim Spinup der Festplatte. Probleme fingen ca. bei Wechsel des PCs an. Ich habe die Aktivierung aus dem Standby (OS:Xubuntu 11.10) mal aufgenommen: http://lefish.pbworks.com/w/file/fetch/50480892/recording_1797673919.mp3 Sofort nach Start ertönt Spinup der System-Festplatte. Bei Sek. 9 ertönt Spinup der Daten-Disk. Der Spinup der Daten-Disk dauert hörbar länger - das alleine ist es aber nicht. Manchmal versucht das System die DatenDisk mehrmalig zu einem Spinup zu bewegen - es ertönt dann mehrmals ein Geräusch wie bei Sek. 9 der Aufnahme. Hier der SMART-Bericht von gestern. Model Family:     SAMSUNG SpinPoint F4 EG (AFT) Device Model:     SAMSUNG HD204UI Serial Number:    S2H7J9AB605313 LU WWN Device Id: 5 0024e9 2056d386b Firmware Version: 1AQ10001 User Capacity:    2,000,398,934,016 bytes [2,00 TB] Sector Size:      512 bytes logical/physical Device is:        In smartctl database [for details use: -P show] ATA Version is:   8 ATA Standard is:  ATA-8-ACS revision 6 Local Time is:    Wed Feb  1 12:07:57 2012 CET ==> WARNING: Using smartmontools or hdparm with this drive may result in data loss due to a firmware bug. ****** THIS DRIVE MAY OR MAY NOT BE AFFECTED! ****** Buggy and fixed firmware report same version number! See the following web pages for details: http://www.samsung.com/global/business/hdd/faqView.do?b2b_bbs_msg_id=386 http://sourceforge.net/apps/trac/smartmontools/wiki/SamsungF4EGBadBlocks SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: FAILED! Drive failure expected in less than 24 hours. SAVE ALL DATA. See vendor-specific Attribute list for failed Attributes. General SMART Values: Offline data collection status:  (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status:      (   0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (20580) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities:            (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability:        (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: (   2) minutes. Extended self-test routine recommended polling time: ( 255) minutes. SCT capabilities:        (0x003f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE   1 Raw_Read_Error_Rate     0x002f   100   100   051    Pre-fail  Always       -       9   2 Throughput_Performance  0x0026   252   252   000    Old_age   Always       -       0   3 Spin_Up_Time            0x0023   020   001   025    Pre-fail  Always   FAILING_NOW 24333   4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       366   5 Reallocated_Sector_Ct   0x0033   252   252   010    Pre-fail  Always       -       0   7 Seek_Error_Rate         0x002e   252   252   051    Old_age   Always       -       0   8 Seek_Time_Performance   0x0024   252   252   015    Old_age   Offline      -       0   9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       945 10 Spin_Retry_Count        0x0032   252   252   051    Old_age   Always       -       0 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       2 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       379 181 Program_Fail_Cnt_Total  0x0022   100   100   000    Old_age   Always       -       9213995 191 G-Sense_Error_Rate      0x0022   100   100   000    Old_age   Always       -       30 192 Power-Off_Retract_Count 0x0022   252   252   000    Old_age   Always       -       0 194 Temperature_Celsius     0x0002   064   050   000    Old_age   Always       -       26 (Min/Max 14/50) 195 Hardware_ECC_Recovered  0x003a   100   100   000    Old_age   Always       -       0 196 Reallocated_Event_Count 0x0032   252   252   000    Old_age   Always       -       0 197 Current_Pending_Sector  0x0032   252   252   000    Old_age   Always       -       0 198 Offline_Uncorrectable   0x0030   252   252   000    Old_age   Offline      -       0 199 UDMA_CRC_Error_Count    0x0036   200   200   000    Old_age   Always       -       0 200 Multi_Zone_Error_Rate   0x002a   100   100   000    Old_age   Always       -       11 223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       2 225 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       -       390 Meine Frage: Dürfte das an der Festplatte oder am System liegen? Vielen Dank! LG LeFish   Re: SpinUp Probleme mit Festplatte  (steiger am 02.02.2012, 11:01:48)   Re: SpinUp Probleme mit Festplatte  (arctic am 02.02.2012, 11:06:06)

 

Dieses Forum ist eine frei zugängliche Diskussionsplattform.
Der Betreiber übernimmt keine Verantwortung für den Inhalt der Beiträge und behält sich das Recht vor, Beiträge mit rechtswidrigem oder anstößigem Inhalt zu löschen.
Datenschutzerklärung