Re(6): Treiber gesucht
Geizhals » Forum » Hardware-Allgemein » Treiber gesucht (23 Beiträge, 1438 Mal gelesen) Top-100 | Fresh-100
Du bist nicht angemeldet. [ Login/Registrieren ]
.  Re: Treiber gesucht  (MikE_ am 06.12.2003, 10:28:46)
..  Re(2): Treiber gesucht  (Songoku880 am 06.12.2003, 10:35:49)
.  Re: Treiber gesucht  (Maxl am 06.12.2003, 10:52:17)
..  Re(2): Treiber gesucht  (Songoku880 am 06.12.2003, 10:54:37)
...  Re(3): Treiber gesucht  (Martin Wernig am 06.12.2003, 15:30:07)
.  Re: Treiber gesucht  (SchusterHarry am 06.12.2003, 11:04:34)
..  Re(2): Treiber gesucht  (Songoku880 am 06.12.2003, 11:18:28)
...  Re(3): Treiber gesucht  (SchusterHarry am 06.12.2003, 11:34:59)
... Vom Autor zurückgezogen oder Autor hat seine Registrierung nicht bestätigt  (stvienna am 06.12.2003, 11:35:59)
...  Re(3): Treiber gesucht  (Martin Wernig am 06.12.2003, 11:44:11)
....  Re(4): Treiber gesucht  (Songoku880 am 06.12.2003, 12:06:46)
.....  Re(5): Treiber gesucht  (Songoku880 am 06.12.2003, 12:12:02)
......
Re(6): Treiber gesucht
06.12.2003, 12:12:33
3.2  Updating the driver

To update the driver, proceed as follows:

1.  On the desktop right click on MY COMPUTER.
2.  Select MANAGE.
3.  In the "Device Manager" select the adapter you wish to update.
4.  Double click.
5.  Select DRIVER.
6.  Click UPDATE DRIVER ... .
7. Follow the instructions given by Windows XP (x86) to locate the driver.
9.  If the driver which is found to be the latest is not the one you want
    to install, select the checkbox "Install one of the other drivers".
9.  Click NEXT.
10. Select the driver to be installed in the next listbox.
11. Click NEXT.
    A message will be displayed that the driver is not digitally signed by
    Microsoft.
12. Click YES.
    The message "Windows has finished installing the software for this
    device" is displayed.
13. Click FINISH to complete the installation.



4  Parameters
The EL2K_XP.sys driver allows you to modify several options in order to
optimize the operation of your 3Com 3C2000-T Adapter
.

1.  In "Network Connections" right click on the adapter you
    want to configure.
2.  Select "Properties".
3.  Click "Configure".
4.  Click "Advanced".
5.  In the "Property" box, select the option that you want to change.
6.  Enter the desired value in the "Value" box.
7.  When finished, click OK .

    Windows XP (x86) will reload the driver with the changed settings.


The parameters supported by the driver are described below.

Network Address
---------------

Registry Name: "NetworkAddress"
Default value:  burned-in adapter address
Valid range:    0y-00-00-00-00-01 to FE-FF-FF-FF-FF-FF (hexadecimal),
                where at least the "locally administered" bit 2h
                (i.e. bit #1) in the 'y' nibble must be set and the
                multicast" bit 1h (i.e. bit #0) must not be set

CAUTION: Each individual network MAC address can only be used once in a
         network. Assigning the same address to more than one adapter in
         the same network is not allowed and can cause serious network
         problems.

To use a network MAC address other than the one burned into the adapter,
enter the network address in the following hexadecimal format:

    XX-XX-XX-XX-XX-XX (e.g. 02-00-5A-98-12-34).

If the network address field blank is left blank (or a different number of
digits is specified), the network address burned into the adapter will
be used.


Maximum Frame Size
------------------

Registry Name: "MaxFrameSize"
Default value:  1514 (decimal)
Valid range:    12..9014 (decimal)

This parameter specifies the maximum frame size in bytes that the driver
will support. The performance of your network usually increases when
a large packet size is used. Do not use values larger than 1514 if you
are not sure if your network supports jumbo frames.


Hardware Checksumming
---------------------

Registry Name: "HwChecksum"
Default value:  1(On)
Valid values:   1 = "On"
                0 = "Off"

This parameter is used to disable the hardware checksum offload for
TCP/IP. There should be no need to disable checksum offload.


Wake Up Capabilities
--------------------

Registry Name: "WakeUpModeCap_" = port designator (A or B)
Default value:  15 (OS Controlled)
Valid values:   0  = "None"
15 = "OS Controlled"
                25 = "Magic *TRÖT*"
                26 = "Pattern Match"
27 = "Magic *TRÖT* and Pattern Match"
                28 = "Link Change"

- "None"                wake on LAN capabilities are disabled
- "OS Controlled" wake up with the default settings
provided through the OS from Hibernate or Standby
                        state
- "Magic *TRÖT*" wake up with MagicPacket from ShutDown state,
OS Controlled from Hibernate or Standby state
- "Pattern Match" wake up with a packet containing a special pattern
   from ShutDown state, OS Controlled from Hibernate
   or Standby state
- "Magic *TRÖT*
   and Pattern Match" wake up with both from ShutDown state, OS Controlled
        from Hibernate or Standby state
- "Link Change" wake up with link change from ShutDown state,
OS Controlled from Hibernate or Standby state

This parameter is only available for   copper versions of the 3Com
3C2000-T Adapter  .



Link Speed
----------

Registry Name: "Speed_" = port designator (A or B)
Default value:  1 (Auto)
Valid values:   1 = "Auto"
                2 = "10"
                3 = "100"
                4 = "1000"

- "Auto"        Auto-negotiate Speed
- "10"          Force Speed to 10 MBit
- "100"         Force Speed to 100 MBit
- "1000"        Force Speed to 1000 MBit

This parameter is only available for   copper versions of the 3Com
3C2000-T Adapter  .

Number of Receive Buffers
-------------------------

Registry Name: "MaxReceives"
Default value:  50 (decimal)
Valid range:    3..500 (decimal)

This parameters defines the number of receive buffers allocated by the
driver. If the system does not have enough resources the driver will fail
to load. Increasing this value may improve performance.


Number of Transmit Buffers
--------------------------

Registry Name: "MaxTransmits"
Default value:  50 (decimal)
Valid range:    4..200 (decimal)

This parameters defines the number of transmit buffers allocated by the
driver. If the system does not have enough resources the driver will
fail to load. Increasing this value may improve performance.


2 mal 40 GB Maxtor HD
ASUS P4P- 800 865 Chipsatz
512 DDR Ram
HIS Excalibur Radeon 9200 128 MB 8x AGP
Soundkarte Hercules DVD 5.1
Intel Pentium 4 Prozessor 2,8 GHz
Netzwerkkarte ist onboard genau wie eine weitere Soundkarte!
WinXP
Antworten PM Alle Chronologisch Zum Vorgänger
 
Melden nicht möglich
.......  Re(7): Treiber gesucht  (Martin Wernig am 06.12.2003, 12:36:05)
........  Re(8): Treiber gesucht  (Martin Wernig am 06.12.2003, 12:42:42)
.........  Re(9): Treiber gesucht  (Songoku880 am 06.12.2003, 13:46:00)
.........  Re(9): Treiber gesucht  (Songoku880 am 06.12.2003, 14:08:35)
..........  Re(10): Treiber gesucht  (crazydoc am 06.12.2003, 15:10:52)
........... Vom Autor zurückgezogen oder Autor hat seine Registrierung nicht bestätigt  (Martin Wernig am 06.12.2003, 15:23:41)
............ Vom Autor zurückgezogen oder Autor hat seine Registrierung nicht bestätigt  (Martin Wernig am 06.12.2003, 15:25:06)
...........  Re(11): Treiber gesucht  (Martin Wernig am 06.12.2003, 15:27:25)
............  Re(12): Treiber gesucht  (chillbear am 06.12.2003, 18:54:22)
 

Dieses Forum ist eine frei zugängliche Diskussionsplattform.
Der Betreiber übernimmt keine Verantwortung für den Inhalt der Beiträge und behält sich das Recht vor, Beiträge mit rechtswidrigem oder anstößigem Inhalt zu löschen.
Datenschutzerklärung